Inovance MD380-5T5.5GB - Page 24

MD380 User Manual Product Information
- 23 -
Item
6SHFL¿FDWLRQV
RUN Output terminal
Standard
1 high-speed pulse output terminal (open-collector) that
supports 0–100 kHz square wave signal output
1 digital output (DO) terminal
1 relay output terminal
1 analog output (AO) terminal that supports 0–20 mA
current output or 0–10 V voltage output
Expanding capacity:
1 DO terminal
1 relay output terminal
1 AO terminal that supports 0–20 mA current output or 0–10
V voltage output
Display and
operation on
the operation
panel
LED display
It displays the parameters.
Key locking and
function selection
,WFDQORFNWKHNH\VSDUWLDOO\RUFRPSOHWHO\DQGGH¿QHWKH
function range of some keys so as to prevent mis-function.
Protection mode
Motor short-circuit detection at power-on, input/output
phase loss protection, overcurrent protection, overvoltage
protection, undervoltage protection, overheat protection and
overload protection
Optional parts
LCD operation panel, braking unit, I/O extension card 1,
I/O extension card 2, user programmable card, RS485
FRPPXQLFDWLRQFDUG352),%86'3FRPPXQLFDWLRQFDUG
CANlink communication card, CANopen communication
card, differential input PG card, UVW differential input PG
card, resolver PG card and OC input PG card
Environment
Installation
location
Indoor, free from direct sunlight, dust, corrosive gas,
combustible gas, oil smoke, vapour, drip or salt.
Altitude
Lower than 1000 m
Ambient
temperature
-10°C to +40°C (de-rated if the ambient temperature is
between 40°C and 50°C)
Humidity
Less than 95%RH, without condensing
Vi
bration
Less than 5.9 m/s2 (0.6 g)
Storage
temperature
-20°C to +60°C
IP
level
IP20
Pollution degree
PD2
Power distribution
system
TN , TT
efesotomasyon.com