Inovance MD380-5T5.5GB - Page 94

MD380 User Manual Function Code Table
- 93 -
)unction
Code
Parameter Name
Setting Range
Default Property
)5-03
Extension card relay function
(P/A-P/%-P/C)
14: Torque limited
15: Ready for RUN
16: AI1 larger than AI2
)UHTXHQF\XSSHUOLPLWUHDFKHG
)UHTXHQF\ORZHUOLPLWUHDFKHG
(no output at stop)
19: Undervoltage state output
20: Communication setting
21: Reserved
22: Reserved
=HURVSHHGUXQQLQJKDYLQJ
output at stop)
24: Accumulative power-on time
reached
)UHTXHQF\OHYHOGHWHFWLRQ
)'7RXWSXW
)UHTXHQF\UHDFKHG
)UHTXHQF\UHDFKHG
28: Current 1 reached
29: Current 2 reached
30: Timing reached
31: AI1 input limit exceeded
32: Load becoming 0
33: Reverse running
=HURFXUUHQWVWDWH
35: Module temperature reached
36: Software current limit
exceeded
)UHTXHQF\ORZHUOLPLWUHDFKHG
(having output at stop)
38: Alarm output
39: Motor overheat warning
40: Current running time reached
)DXOWRXWSXW7KHUHLVQR
output if it is the coast to stop
fault and undervoltage occurs.)
0 ƿ
)5-04
O1 function selection (open-
collector output terminal)
)5-04
DO1 function selection
(open-collector output
terminal)
1 ƿ
)5-05 Extension card DO2 function 4 ƿ
efesotomasyon.com