AC Drive Wiring
‑22‑
No. Item
Checked
5
The motor output cable does not exceed 50 m. Otherwise, the carrier
frequency needs to be reduced through F0‑15.
□
6
The ground cables are connected correctly.
□
7
The output terminals and control signal terminals are securely
fastened.
□
8
The braking resistor and braking unit (if used) are connected correctly
and have proper resistance.
□
9
The control circuit signal cables are shielded twisted pair cables.
□
10
The control circuit cables and main circuit power cables are routed
separately.
□
11
There are no screws, gaskets, or exposed cables left inside the
product.
□
To Next Page
Loading...
