‑7‑
Fundamental Safety Instructions
● Handle the equipment with care during transportation and mind your steps to prevent
personal injuries or equipment damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with
care to prevent parts from falling. Failure to comply may result in personal injuries.
● Store and transport the equipment based on the storage and transportation
requirements. Failure to comply can result in equipment damage.
● Avoid storing or transporting the equipment in environments with water splash, rain,
direct sunlight, strong electric field, strong magnetic field, and strong vibration.
● Avoid storing the product for more than 3 months. When the product needs to be stored
for an extended period, take more strict protection and necessary inspection.
● Pack the equipment strictly before transportation. Use a sealed box for long‑distance
transportation.
● Never transport the equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
Installation
● The equipment must be operated only by professionals with electrical knowledge. Non‑
professionals are not allowed.
● Read through the guide and safety instructions before installation.
● Do not install this equipment in places with strong electric or magnetic fields.
● Before installation, check that the mechanical strength of the installation site can bear
the weight of the equipment. Failure to comply can result in mechanical hazards.
● Do not wear loose clothes or accessories during installation. Failure to comply may
result in an electric shock.
● When installing the equipment in a closed environment (such as a cabinet or casing),
use a cooling device (such as a fan or air conditioner) to cool the environment down to
the required temperature. Failure to comply may result in equipment over‑temperature
or a fire.
● Do not retrofit the equipment.
● Do not fiddle with the bolts used to fix equipment components or the bolts marked in
red.
● When this product is installed in a cabinet or terminal equipment, protective measures
such as a fireproof enclosure, electrical enclosure, or mechanical enclosure must be
provided. The IP rating must meet IEC standards and local laws and regulations.
● Before installing equipments with strong electromagnetic interference, such as a
transformer, install a shielding equipment for the equipment to prevent malfunction.
● Install the product on an incombustible object such as metal and do not contact or
attach the product with combustible objects. Failure to comply will cause fires.
To Next Page
Loading...
