5 System Commissioning
-
142
-
This chapter describes the basic commissioning guide of the NICE3000
new
. By follow-
ing the instruction, you can perform complete commissioning on the elevator system
and implement all basic normal running functions of the elevator.
5.1 System Commissioning Guide
Start
End
Leveling accuracy
adjustment
Riding comfort
adjustment
Motor auto-tuning
Running test at
inspection speed
Safety and circuit
check
Power-on and
controller state check
Commissioning at
inspection speed
Commissioning at
normal speed
Riding comfort
adjustment
Shaft auto-tuning
Car commissioning
HCB commissioning
new
5.2 Safety and Circuit Check
Pay attentions to the following precautions before performing commissioning:
◆
The input and output terminals of the NICE3000
new
have default setting at delivery. You
can change the setting based on your requirements. The examples in this manual are all
based on the default setting of the terminals.
1 System Wiring Diagram
Refer to Figure 2-39.
To Next Page
Loading...