6 Parameter Description
-
261
-
Function
Code
Name Setting Range Default Unit Property
E9-11
Output frequency upon 10
st
fault
0.00 to 99.99 0 Hz
E9-12 Torque current upon 10
st
fault 0.0 to 999.9 0 A
E9-13 Output voltage upon 10
st
fault 0 to 999.9 0 V
E9-14 Output torque upon 10
th
fault 0 to 200.0 0 %
E9-15 Output power upon 10
st
fault 0.00 to 99.99 0 kW
E9-16
Communication interference
upon 10
st
fault
0 to 65535 0
E9-17 Reserved 0 to 65535 0
E9-18 Input state 1 upon 10
th
fault 0 to 65535 0
E9-19 Input state 2 upon 10
th
fault 0 to 65535 0
E9-20 Input state 3 upon 10
th
fault 0 to 65535 0
E9-21 Input state 4 upon 10
th
fault 0 to 65535 0
E9-22 Input state 5 upon 10
th
fault 0 to 65535 0
E9-23 Output state 1 upon 10
th
fault 0 to 65535 0
E9-24 Output state 2 upon 10
th
fault 0 to 65535 0
E9-25 Car input state upon 10
st
fault 0 to 65535 0
E9-26
Car output state upon 10
st
fault
0 to 65535 0
E9-27 Hall call state upon 10
st
fault 0 to 65535 0
E9-28 System state 1 upon 10
th
fault 0 to 65535 0
E9-29 System state 2 upon 10
th
fault 0 to 65535 0 -
These parameters record the last 10 faults and list the system states for every fault in
detail.
To Next Page
Loading...