Keypad
‑60‑
■ Signed number with more than 4 digits or unsigned number with more than 5
digits
Such numbers are displayed from low to high bits in several pages (5 digits per
page): current page + values on current page, as shown in the following figure.
Hold down SHIFT for more than 2s to switch to the next page.
For example, "‑1073741824" is displayed as follows.
Figure 5‑3 Display of "‑1073741824"
Example: "1073741824" is displayed as follows:
Figure 5‑4 Display of "1073741824"
● Display of the decimal point
The segment "." of the ones indicates the decimal point, which does not blink.
Display
Name
Description
Decimal point
100.0
● Display of parameter setting status
Display
Name
Applicable
Occasion
Meaning
Done
(parame
ter setting
done)
The parameter
is set
successfully.
The parameter is set and saved
to the servo drive (Done). The
servo drive can execute other
operations.
F.InIt
(restored
to default)
Parameter
initialization is
in progress
(H02.31 = 1).
The servo drive is in the process
of parameter initialization.
Switch on the control circuit
again after initialization is done.
To Next Page
Loading...
