EasyManua.ls Logo

Insignia NS-R5101HD - AV Receiver - Antenna and Video Connections; Connecting an FM Antenna; About Video Connections

Insignia NS-R5101HD - AV Receiver
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
NS-R5101HD 5.1 Surround Sound Receiver
www.insigniaproducts.com
Aiming the remote control
To aim the remote control:
Aim the remote control at the remote sensor on
the front of your receiver. The operating range is
within 30°. The operating distance is within
23 feet (7 meters)
Making connections
Connecting an FM antenna
If an indoor FM antenna does not provide clear
reception, you can connect an outdoor FM antenna.
To connect an FM antenna:
1 Plug the indoor FM antenna into the FM 75Ω
jack on the back of the receiver.
Or,
Disconnect the indoor FM antenna (if it is
connected), then plug the outdoor FM antenna
into the FM 75Ω jack on the back of the receiver.
2 Adjust the position of the antenna until you get
the best reception.
Note
Make sure that there are no obstructions between
the remote control and the remote control sensor on
the front of your receiver.
Notes
Make sure that your receiver is unplugged from
the power outlet before making any
connections.
Because different devices often have different
jack names, carefully read the operating
instructions of the connected device.
Observe the color coding when connecting
audio, video, and speaker cords.
Make sure that you connect cables firmly and
correctly. Poor or incorrect connections can
cause loss of sound, noise, or damage to the
receiver.
23 ft. (7 m)
Indoor FM antenna
Outdoor FM antenna

Table of Contents

Other manuals for Insignia NS-R5101HD - AV Receiver

Related product manuals