9
5.1 Surround Sound Receiver
www.insigniaproducts.com
2 Connect an audio cable to the AUDIO IN DVD
jacks on the back of your receiver and to the
AUDIO OUT jacks on the player.
Connecting a TV
To connect a TV using HDMI:
• Connect an HDMI cable to the HDMI OUT jack on
the back of your receiver and to the HDMI IN jack
on the TV.
To connect a TV using component video:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your receiver and to the COMPONENT VIDEO
IN jack on the TV.
2 Connect an audio cable to the TV IN AUDIO L/R
jacks on the back of your receiver and to the
AUDIO OUT jacks on the TV.
To connect a TV using standard (composite)
video:
1 Connect a standard (composite) video cable to
the MONITOR OUT jack on the back of your
receiver and to the VIDEO IN jack on the TV.
2 Connect an audio cable to the TV IN AUDIO L/R
jacks on the back of your receiver and to the
AUDIO OUT jacks on the TV.
Note
You can also connect the audio to a digital audio jack
on your receiver. For more information, see
“Connecting digital audio” on page 10.
Note
You cannot view the on-screen display (OSD) on a TV
connected using HDMI. To view the OSD, you need to
connect the TV using component or standard
(composite) video.
Note
• An HDMI cable carries both video and audio.
You do not need to make an audio connection.
• When you want to enjoy the picture on your TV
without the sound, set the HDMI to AMP.
TV
TV
Note
When viewing video program sources through
MONITOR OUT jack, you must use the same type of
video jacks that you did connect to video playback
components such as Blu-ray Disc player, DVD player,
or cable TV tuner.
TV
TV
TV
To Next Page
Loading...
