2–2 Minimate Pro Operator Manual
(1) The Minimate Pro initially displays the Instantel logo, followed by the Minimate Pro
software version and date of release.
(2) The unit then displays the results of a File System Check diagnostic tool. This is the
same File System Check that is run in the Maintenance menu, Self Check (reference
Section 9.6.e) option.
The unit will prompt to repair any errors found during the File System Check. If this is
the case, accept the disclaimer notice and follow the prompts, or wait 30 seconds and the
unit will continue to load the software configuration without applying any changes.
The sample series of displays below indicates that there were no errors found, and the
unit automatically begins loading the software configuration.
To Next Page
Loading...
General