Need help?Do you have a question about the Instantel Minimate Pro Series and is the answer not in the manual?
Verify all delivered parts against the shipping invoice. Keep shipping box for safe return.
Record essential identification numbers for future reference and product registration.
Fill out and return the warranty registration card to activate product support and warranty.
Ensure the local power supply is compatible with the unit's AC adapter specifications.
Instructions for proper disposal of the product in accordance with EU WEEE Directive regulations.
Procedures for activating the Minimate Pro's deactivated battery for use or charging.
Monitor battery levels and available memory on the unit's display or through the About feature.
Guidance on charging, battery life expectations, and proper handling of the unit's internal battery.
General guidelines for safely handling all equipment and accessories to prevent damage.
Steps to take if the instrument is dropped or its casing is damaged, including inspection and service.
Guidelines for using the correct AC adapter and a properly rated electrical outlet to avoid hazards.
Prevent contact with foreign objects on adapter terminals and avoid submerging the unit in liquids.
Instructions for keeping the unit charged, disconnecting the battery for storage, and handling cables.
Proper methods for connecting/disconnecting cables and avoiding forcing connectors to prevent damage.
Keep computer disks away from geophones due to their magnetic properties.
Step-by-step guide for basic unit operation, including sensor connection and monitoring mode activation.
Procedures for battery disconnection before shipping and important warnings about battery service.
Illustrates a typical monitoring scenario, showing sensor connections and data acquisition.
Lists recommended literature for further information on vibration and blasting analysis.
Compares the features, channels, and capabilities of the Minimate Pro4 and Pro6 models.
Detailed technical specifications for vibration and air overpressure monitoring, including ranges and accuracy.
Describes the physical dimensions, weight, and mounting template for the Minimate Pro unit.
Lists the available Minimate Pro units and their corresponding accessories, including part numbers.
Explains the unit's keypad layout and how to navigate through its menus and functions.
Details the optional cable for external triggering of multiple Minimate Pro units.
Describes the optional remote alarm controller for indicating normal and over-triggering conditions.
Features for viewing histogram data remotely via Ethernet connectivity.
Explains the optional VDV monitoring mode for measuring whole-body vibration.
How to use the GPS feature to log location information relative to blasts for event reports.
Information on using the sound level microphone for noise monitoring alongside vibration.
Guide on installing the necessary Blastware software for unit operation and data management.
Instructions for connecting geophones and microphones to the Minimate Pro unit.
Steps for connecting the Minimate Pro to a PC via USB/Serial and to a power source.
Procedure for powering on the Minimate Pro, including battery activation without AC adapter.
Instructions on launching the Blastware software application on the computer.
Configuring communication settings between the Minimate Pro and the computer via serial or Ethernet.
Customizing the content and appearance of event summary reports generated by Blastware.
Guide to creating and editing setup files within Blastware for configuring unit parameters.
Step-by-step process for setting up and recording a sample event using the Minimate Pro.
Access and review recorded events and their detailed information.
Choose or delete previously saved configuration files for the unit.
Manage operator profiles, including adding, deleting, or renaming operators.
Configure recording modes, sample rates, trigger levels, and other parameters for event monitoring.
Adjust unit settings like measurement system, display, sound, and communication preferences.
Access diagnostic tools, perform self-checks, and manage unit maintenance procedures.
Explains the importance of calibration and what a calibration certificate signifies.
Differentiates channel usage for pressure sensors between Minimate Pro4 and Pro6 models.
Provides detailed specifications for DIN Geophone, ISEE Geophone, and ISEE Linear Microphone.
Step-by-step instructions for installing geophones on various surfaces.
Procedures for installing the ISEE Linear Microphone using its mounting stand.
Outlines basic maintenance tasks that can be performed by the operator, such as cleaning and storage.
Explains the function of anti-aliasing filters in preventing signal distortion during sampling.
Describes the methods used by the Minimate Pro for analyzing ground vibration and sound pressure data.
To Next Page
General