63
Basic Operations—Continued
Using the Easy macro command in the Easy macro
mode, you can sequentially operate Integra/Onkyo com-
ponents with simple commands by simply pressing one
button. These commands are user-specifiable (see
page 151) and the default actions are described below.
Press the Activities buttons to start the Easy macro com-
mand.
Once the AV controller has entered the normal macro
mode, all of the Activities buttons will automatically
switch to the normal macro mode. In this case, pressing
the [All Off] button will set only the AV controller to
Standby mode.
*1. Depending on the start-up time of the DVD/BD player, the AV
controller may not activate this playback command. In this case,
press the Play [1] button on the remote controller.
*2. When [My Music] is selected, with the default settings, this will
not be performed.
*3. With some televisions, the power may not be turned off (or enter
standby).
Using Easy Macros
1
Press the [My Movie], [My TV], or
[My Music] button.
My Movie (default):
1. The TV connected to the AV con-
troller is turned on.
2. The Integra/Onkyo DVD player
connected to the AV controller is
turned on.
3. The AV controller is turned on.
4. The input selector of the AV con-
troller is set to “DVD/BD”.
5. The player starts playback.
*1
My TV (default):
1. The TV connected to the AV con-
troller is turned on.
2. The cable set-top box connected to
the AV controller is turned on.
3. The AV controller is turned on.
4. The input selector of the AV con-
troller is set to “CBL/SAT”. You
can enjoy cable TV.
Receiver
Audio
All Off,
My Movie,
My TV,
My Music
Activities
buttons
My Music (default):
1. The Integra/Onkyo CD player con-
nected to the AV controller is
turned on.
2. The AV controller is turned on.
3. The input selector of the AV con-
troller is set to “CD”.
4. The player starts playback.
Note:
Once you start the Easy macro com-
mand, you cannot use other Activities
buttons during the execution. If you
want to operate other components half-
way, press the [All Off] to stop and
press desired Activities button.
2
Press the [All Off] button.
1. The connected component stops
and turns off.
2. The AV controller turns off.
3. The TV connected to the AV con-
troller turns off (Standby).
*2*3
To Next Page
Loading...
Need help?
General
