EasyManuals Logo
Home>Integra>Controller>DHC-80.1

Integra DHC-80.1 User Manual

Integra DHC-80.1
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
83
Recording
This section explains how to record the selected input
source to a component with recording capability, and
how to record audio and video from different sources.
Notes:
The surround sound and DSP listening modes cannot
be recorded.
Copy-protected DVDs cannot be recorded.
Sources connected to a digital input cannot be
recorded. Only analog inputs can be recorded.
DTS signals will be recorded as noise, so don’t
attempt analog recording of DTS CDs or LDs.
AV Recording
Audio sources can be recorded to a recorder (e.g., cas-
sette deck, CDR, MD) connected to the TV/TAPE OUT
jack. Video sources can be recorded to a video recorder
(e.g., VCR, DVD recorder) connected to the VCR/DVR
OUT jack. See pages 26 to 40 for hookup information.
Recording Separate AV Sources
Here you can record audio and video from completely
separate sources, allowing you to overdub audio onto
your video recordings. This function takes advantage of
the fact that when an audio-only input source (i.e., TV/
Tape, Tuner, CD or Phono) is selected, the video input
source remains unchanged.
In the following example, audio from the CD player con-
nected to the CD IN, and video from the camcorder con-
nected to the AUX1 Input Video jack are recorded by the
VCR connected to the VCR/DVR OUT jacks.
1
Use the input selector buttons to
select the source that you want
to record.
You can watch the source while record-
ing. The AV controller’s Master Vol-
ume control has no effect on recording.
2
On your recorder, start record-
ing.
3
On the source component, start
playback.
If you select another input source dur-
ing recording, that input source will be
recorded.
1
Prepare the camcorder and CD player for
playback.
2
Prepare the VCR for recording.
3
Press the [AUX1] input selector button.
4
Press the [CD] input selector button.
This selects the CD player as the audio source, but
leaves the camcorder as the video source.
5
Start recording on the VCR and start play-
back on the camcorder and CD player.
The video from the camcorder and the audio from
the CD player are recorded by the VCR.
Camcorder
VCRCD player
video signal
audio signal

Table of Contents

Other manuals for Integra DHC-80.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DHC-80.1 and is the answer not in the manual?

Integra DHC-80.1 Specifications

General IconGeneral
BrandIntegra
ModelDHC-80.1
CategoryController
LanguageEnglish

Related product manuals