Integra DHC-80.1 User Manual

97
Advanced Setup—Continued
Component Video Input
See “Component Video Input Setup” on page 48.
Digital Audio Input
See “Digital Audio Input Setup” on page 49.
Analog Audio Input
Multich See “Analog Audio Input Setup” on page 50.
Subwoofer Input Sensitivity
0 dB (default), 5 dB, 10 dB, 15 dB
Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal.
With this setting, you can change the AV controller’s subwoofer sensitivity to match your DVD player. Note
that this setting only affects signals connected to the AV controller’s MULTI CH: SUBWOOFER jack.
If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting.
Balance See “Analog Audio Input Setup” on page 50.
Input Channel See “Analog Audio Input Setup” on page 50.
Gamma Curve
The color range and the brightness characteristic of a reproduced image depend on the TV or projector. With this
setting, you can adjust the balance of the color signals (R, G, and B).
To view the TV picture while setting, press the [Enter] button. To return to the default, press the [CLR] button. The
“Gamma Curve” setting is set respectively of HDMI main, HDMI sub, and analog.
Red Gamma 0 to Red Gamma 9
Green Gamma 0 to Green Gamma 9
Blue Gamma 0 to Blue Gamma 9
The following graph shows the default settings.
24
32
48
64
80
96
128
160
192
224
Output
Input
Gamma0 Gamma7 Gamma9 Gamma8 Gamma6 Gamma5 Gamma4 Gamma3 Gamma2 Gamma1

Integra DHC-80.1 Specifications

General

Brand	Integra
Model	DHC-80.1
Category	Controller
Language	English