Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS Jumper Blocks
Revision 1.8
Intel order number E39529-013
121
8. Power down the system and remove the AC power cord.
9. Open the server chassis.
10. Move the BIOS recovery jumper (J1E5) from the “enabled” position (covering pins 2 and
3) to the “disabled” position (covering pins 1 and 2).
11. Close the server chassis.
12. Reconnect the AC power cord and power up the server.
Warning: DO NOT interrupt the BIOS POST during the first boot after the BIOS recovery.
To Next Page
Loading...
Need help?
General
