Intel® Server Boards S5520HC, S5500HCV and S5520HCT TPS Appendix G: Installation Guidelines
Revision 1.8
Intel order number E39529-013
171
5. When EFI Shell is selected as the first device on the BIOS boot option list, some RAID
adapters may not enter their configuration screen before the server board boots into
EFI Shell.
Description
In an Intel
®
Server Board S5520HC or S5500HCV based system with EFI shell as first boot device,
after users press hot keys to enter RAID adapter configuration screen that hooks option ROM on INT
19h, the system may boot in to EFI shell instead.
Guideline
Type ‘exit’ and execute under the EFI shell, the RAID adapter configuration screen will show up if
configuration screen hot keys were pressed during POST.
See 32MB video memory of onboard video controller after install onboard video driver
Description
After install driver of Intel
®
Server Boards S5520HC, S5500HCV and S5520HCT onboard video
controller, the video driver will report 32MB video memory instead of 8MB
Guideline
The memory reported by onboard video driver is ‘attached memory’, which is accessed by the video
controller for internal operations. The graphic memory size for display function is still 8MB
To Next Page
Loading...
Need help?
General
