EasyManua.ls Logo

Intel Ethernet X520 10GbE Dual Port KX4 Mezz

Intel Ethernet X520 10GbE Dual Port KX4 Mezz
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Event
ID
Message Severity
l
Intel® Ethernet 10G 2P X520 Adapter
l
Intel® Ethernet 10G 4P X540/I350 rNDC
l
Intel® Ethernet 10G 4P X520/I350 rNDC
l
Intel® Ethernet 10G 2P X520-k bNDC
55 The value of NumVFs exceeds the maximum value allowed by the driver in the current con-
figuration. The value will be set to the maximum allowed.
NOTE: This message is used only for the following adapters:
l
Intel® Ethernet X520 10GbE Dual Port KX4 Mezz
l
Intel® Ethernet X520 10GbE Dual Port KX4-KR Mezz
l
Intel® Ethernet Server Adapter X520-2
l
Intel® Ethernet Server Adapter X520-T2
l
Intel® Ethernet 10G 2P X540-t Adapter
l
Intel® Ethernet 10G 2P X520 Adapter
l
Intel® Ethernet 10G 4P X540/I350 rNDC
l
Intel® Ethernet 10G 4P X520/I350 rNDC
l
Intel® Ethernet 10G 2P X520-k bNDC
Informational
Intel Advanced Network Services Messages
Below is a list of intermediate driver custom event messages that appear in the Windows Event Log.
Event
ID
Message Severity
2 Unable to allocate required resources. Free some memory resources and restart. Error
3 Unable to read required registry parameters. To resolve, remove the adapter team and then
create a new team.
Error
4 Unable to bind to physical adapter. To resolve, remove the adapter team and then create a
new team.
Error
5 Unable to initialize an adapter team. To resolve, remove the adapter team and then create a
new team.
Error
6 Primary Adapter is initialized: <member description> Informational
7 Adapter is initialized: <member description> Informational
8 Team #<team ID>: Team is initialized. Informational
9 Team #<ID>: Virtual Adapter for <VLAN name> [VID=<VLAN ID>] initialized. Informational
10 Current Primary Adapter is switching from: <member description> Informational
11 Adapter link down: <member description> Warning
12 Secondary Adapter took over: <member description> Informational
13 The <member description> has been deactivated from the team. Warning
14 Secondary Adapter has rejoined the Team: <member description> Informational
15 Adapter link up: <member description> Informational
16 Team #<ID>: The last adapter has lost link. Network connection has been lost. Error

Table of Contents

Related product manuals