Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual

Event
ID
Message Severity
17 Team #<ID>: An adapter has re-established link. Network connection has been restored. Informational
18 Preferred primary adapter has been detected: <member description> Informational
19 Preferred secondary adapter has been detected: <member description> Informational
20 Preferred primary adapter took over: <member description> Informational
21 Preferred secondary adapter took over: <member description> Informational
22 Primary Adapter does not sense any Probes: <member description>. Possible reason: par-
titioned Team.
Warning
23 Team #<ID>: A Virtual Adapter failed to initialize. Error
32 An illegal loopback situation has occurred on the adapter in device <member description>.
Check the configuration to verify that all the adapters in the team are connected to 802.3ad
compliant switch ports.
Warning
35 Initializing Team #<ID> with <missing #> missing adapters. Check the configuration to verify
that all the adapters are present and functioning.
Warning
37 Virtual adapter for <VLAN name> [VID=<VLAN ID>] removed from team #<team ID>. Informational
38 Adapter removed from team #<ID>. Informational
39 You may not be able to change the virtual adapter settings. To resolve, reload the driver. Warning
40 Virtual adapter unload process may have not completed successfully. Driver may not be
unloaded. To resolve, reboot the system.
Warning

Intel Ethernet X520 10GbE Dual Port KX4 Mezz Specifications

General

Interface	KX4
Data Rate	10 Gbps
Form Factor	Mezzanine
Data Transfer Rate	10 Gbps
Product Type	Network Adapter
Controller	Intel 82599
PCIe Version	2.0
Virtualization	Yes
Operating Temperature	0°C to 55°C
Jumbo Frames	Supported
Ports	Dual Port