2 Intel
®
Server Board S5000PSL
Table 2 summarizes the features of the server board.
Table 2. Server Board Features
Feature Description
Processor support
• Up to two Dual-Core Intel
®
Xeon
®
processors 5000 or 5100
sequence with a 677-, 1066-, or 1333-MHz front side bus
• Up to two Quad-Core Intel
®
Xeon
®
processors 5300 sequence
with a 1066- or 1333-MHz front side bus
• Up to two 45nm 2P Dual-Core Intel
®
Xeon
®
processors.
Product codes S5000PSLSATAR, S5000PSLSASR,
S5000PSLROMBR, and S5000XSLSATAR only
• Up to two 45nm next generation Quad-Core Intel
®
Xeon
®
processors. Product codes S5000PSLSATAR,
S5000PSLSASR, S5000PSLROMBR, and S5000XSLSATAR
only
System memory support
• Eight FBDIMM sockets (DDR2-533 and DDR2-667) supporting
32 GB maximum memory
• Quad-channel memory architecture
Intel
®
5000P Chipset • Product codes S5000PSLSATA, S5000PSLSATAR,
S5000PSLSAS, S5000PSLSASR, S5000PSLROMB,
S5000PSLROMBR: Intel
®
5000P Memory Controller Hub
• Product code S5000XSLSATA, S5000XSLSATAR: Intel
®
5000X Memory Controller Hub
• Intel
®
6321ESB I/O Controller Hub
Cooling Support for
• Two processor fans (4-pin headers)
• Four front fans (6-pin headers)
• Two rear fans (4-pin header)
3-pin fans are compatible with all fan headers. 4-pin fans should be
used only with the following fans:
• CPU1 Fan
• CPU2 Fan
• Sys Fan 1
• Sys Fan 2
• Sys Fan 5
• Sys Fan 6
Sys Fan 3 and Sys Fan 4 are connected to the CPU1 PWM, which
is programmed to work with the 4-pin active heatsink fans.
Add-in card slots Six expansion slots:
• One PCI-X* 64-bit / 100-MHz slot
• One PCI-X* 64-bit / 100- / 133-MHz slot
and one of from the following list
• Two PCI Express* x4 slots (product code S5000PSLSAS or
S5000PSLSASR)
• Two PCI Express x8 slots (product code S5000PSLSATA,
S5000PSLSATAR, S5000XSLSATA, or S5000XSLSATAR)
To Next Page
Loading...
Need help?
General
