Intel
®
Server Board S5000PSL 33
Installing the Processor
Notes:
• Do not touch the contacts on either the processor or the processor socket.
• Do not force the processor socket into place. When correctly aligned, the socket will
easily drop into place.
To install a processor, follow these instructions:
1. Observe the safety and ESD precautions in “Safety Information” on page iii.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. See the documentation that came with your chassis for
instructions on removing the cover.
5. Locate the processor sockets (see Figure 11).
To Next Page
Loading...
Need help?
General
