Intel S2600IP User Manual

Intel
®
Server Board S2600IP and
Intel
®
Workstation Board W2600CR
Technical Product Specification
Intel order number G34153-003
Revision 1.1
June, 2012
Enterprise Platforms and Services Division - Marketing

Intel S2600IP Specifications

General

Form Factor	SSI EEB
Product Type	Server Motherboard
Number of CPU Sockets	2
Chipset	Intel C602
Memory Slots	16
Expansion Slots	7
SATA Ports	6
SAS Ports	8
Network	Dual Gigabit Ethernet
Management	IPMI 2.0
CPU Socket	Socket R3 (LGA 2011-v3)
Supported Processors	Intel Xeon E5-2600 v3/v4
Memory Type	DDR4
Memory Speed	1600 MHz
RAID Support	0, 1, 10
Network Controller	Intel I350
Networking	Ethernet
USB Ports	2 x USB 3.0, 4 x USB 2.0

Summary

Revision History

Disclaimers

1. Introduction

2. Product Overview

2.1 Product Feature Set

Details the key features and specifications for the Intel Server Board S2600IP and Workstation Board W2600CR.

2.1.1 Main Board Connector and Component Layout

3. Functional Architecture

3.1 Processor Support

Details the supported Intel Xeon E5-2600 processor family and population rules for the server board.

3.2.2 Integrated Memory Controller (IMC) and Memory Subsystem

3.2.2.2 Memory Population Rules

Provides guidelines for populating memory slots for optimal system performance and compatibility.

3.3 Intel® C600-A Chipset Functional overview

3.5 Network Interface Controller

4. Platform Management Overview

4.1 Server Management Function Architecture

Details the architecture and features of the server management functions and IPMI 2.0 support.

4.2 Server Management Functional Specifications

4.2.5 BMC Beep Codes

Lists common beep codes generated by the BMC for failure conditions and their associated sensors.

4.3 Sensor Monitoring

4.4 Thermal and Acoustic Management

4.5 Platform Management Interface

4.5.3 LAN Interface

Details the BMC's network communication capabilities using IPMI 1.5 and 2.0 messaging models.

4.5.3.17 Embedded Web Server

4.6 BMC Firmware Update

4.7 Advanced Management Feature Support

4.7.2 Keyboard, Video, Mouse (KVM) Redirection

Explains the KVM redirection feature over LAN for remote server control.

5. System Security

5.1 BIOS Password Protection

Details BIOS password protection mechanisms to prevent unauthorized access.

5.2 Trusted Platform Module (TPM) Support

6. Connector/Header Locations and Pin-outs

6.1 Power Connectors

Describes the pin-outs for the main server board power and CPU power connectors.

6.2 Front Panel Header and Connectors

6.3 On Board Storage Connectors

6.5 FAN Connectors

6.6 Serial Port and Video Connectors

7. Jumper Blocks

7.1 BIOS Default and Password Reset Usage Procedure

Provides procedures for clearing CMOS settings and system passwords using jumpers.

7.2 Force BMC Update Procedure

8. Intel® Light Guided Diagnostics

8.5 System ID LED, System Status LED and POST Code Diagnostic LEDs

Describes the location and function of system status and POST code diagnostic LEDs.

9. Design and Environmental Specifications

9.1 Products Design Specifications

Defines the operating and non-operating environmental limits for the server boards.

9.3 Server Board Power Requirements

Appendix B: BMC Sensor Tables

Appendix C: Platform Specific BMC Appendix

Intel® Server Board S2600IP

Provides platform and chassis specific information for the BMC on the S2600IP.

Intel® Workstation Board W2600CR

Appendix D: POST Code Diagnostic LED Decoder

Appendix E: POST Error Messages and Handling

Glossary