Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPS Functional Architecture
Revision 1.1 21
Intel order number G34153-003
Figure 16. Processor Socket Assembly
Figure 17. Processor Socket ILM
The square ILM has an 80x80mm heat sink mounting hole pattern and is used on the Intel
®
Server Board S2600IP and Intel
®
Workstation Board W2600CR.
Note: Processor Thermal solutions for the Intel
®
Workstation Board W2600CR are NOT the
same with Intel
®
Server Board S2600IP when install 150W TDP Processors.
Independent Latching
Mechanism (ILM)
To Next Page
Loading...
Need help?
General
