Intel S2600IP User Manual

Appendix E: POST Error Messages and Handling Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPS
Revision
1.1
Intel order number G34153-003
168
Table 87. Integrated BMC Beep Codes
Code
Reason for Beep
Associated Sensors
1-5-2-1
No CPUs installed or first CPU socket is
empty.
CPU1 socket is empty, or sockets are populated
incorrectly
CPU1 must be populated before CPU2.
1-5-2-4
MSID Mismatch
MSID mismatch occurs if a processor is installed into a
system board that has incompatible power capabilities.
1-5-4-2
Power fault
DC power unexpectedly lost (power good dropout) –
Power unit sensors report power unit failure offset
1-5-4-4
Power control fault (power good assertion
timeout).
Power good assertion timeout – Power unit sensors
report soft power control failure offset
1-5-1-2
VR Watchdog Timer sensor assertion
VR controller DC power on sequence was not
completed in time.
1-5-1-4
Power Supply Status
The system does not power on or unexpectedly powers
off and a Power Supply Unit (PSU) is present that is an
incompatible model with one or more other PSUs in the
system.

Intel S2600IP Specifications

General

Brand	Intel
Model	S2600IP
Category	Motherboard
Language	English