Intel
®
Server Board S5000PSL 43
15. Close the load plate.
16. Close the socket lever. Push downward on the socket lever while pushing it toward
the center of the processor socket to engage it under the hook on the processor
socket.
17. If installing a replacement processor, see “Installing the Processor” on page 33.
18. Reinstall and reconnect any parts you removed or disconnected to reach the
processor sockets. See the documentation that came with your chassis for
instructions on installing chassis components.
19. Replace the chassis cover. See the documentation that came with your chassis for
instructions on installing the cover.
Replacing the CMOS Battery
The lithium CMOS battery on the server board powers the RTC in the absence of power.
When the battery starts to weaken, it loses voltage, and the system settings stored in
CMOS RAM in the RTC (for example, the date and time) may be wrong. Contact your
customer service representative or dealer for a list of approved devices.
Warning: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Discard used batteries
according to manufacturer's instructions.
Advarsel: Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med
batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
Va rning: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ
som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.
Varoitus: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
To Next Page
Loading...
Need help?
General
