12
Electric Fence Trigger Zone
The event generated in this trigger will be 131. To program it, check the topic 3.7.
Zone Attributes (
as of version 1.90).
Note:
As of version 5.0 the Zone Attributes function will be removed and the pro-
gramming command will be:
Enter + 68 + G + Enter
G = 0 Zones 1 to 8
1 9 to 16
2 17 to 24
3 25 to 32
4 33 to 40
5 41 to 48
6 49 to 54
7 55 to 64
Intercom Ringing Zone
The event generated in this trigger will be 322. For this zone conguration there will
be no event restoration. To program it, check the topic
3.7. Zone Attributes (as of
version 1.90).
Note:
»
If you wish to send several doorbell rings after the alarm center is activated, you
must enable the sending of events in real time (Real Time Reporting).
»
As of version 5.0 the Zone Attributes function will be removed and the program-
ming command will be:
Enter + 69 + G + Enter
G = 0 Zones 1 to 8
1 9 to 16
2 17 to 24
3 25 to 32
4 33 to 40
5 41 to 48
6 49 to 54
7 55 to 64
To Next Page
Loading...
