Need help?Do you have a question about the Intelbras ELC 5002 and is the answer not in the manual?
Safe handling, replacement, and environmentally sound disposal of batteries for the equipment.
Detailed identification of the main components on the electrifier board.
Essential safety practices, general rules, and wire diameter selection for installation.
Placement of warning signs and safety distances for overhead power lines.
Connecting sirens, auxiliary devices, zones, and alarm panels for system integration.
Using LED indicators for status and PGM for system activation/deactivation.
Methods for activating/deactivating the fence and securely mounting the equipment.
Properly connecting the equipment to the 115-230 Vac mains power supply with safety measures.
Connecting the system battery for backup power and charger functionality.
Installing high voltage output, ground, and return cables correctly for system operation.
Ensuring proper grounding for user safety, lightning protection, and overload prevention.
Guidelines for assembling the electric fence with rods and insulators.
Procedures for mounting fence rods and configuring system parameters.
Steps for programming remote controls and wireless sensors for system operation.
Jumper configuration and user manuals for specific remote control models.
Clearing sensors, configuring siren beeps, testing, and setting pulse parameters.
Enabling/disabling arming and performing the fence perimeter learning process.
Adjusting fence tension and performing tests for leaks and breaks.
How to perform a general system reset to restore factory default settings.
Methods for activating/deactivating the fence and understanding LED status indicators.
General| Brand | Intelbras |
|---|---|
| Model | ELC 5002 |
| Category | Power Supply |
| Language | English |
To Next Page