8
2. Characteristics
The purpose of the ELC 5002/ELC 5003 and ELC 5112 electric fence centers is to energize the fence for
the protection of commercial, residential and industrial areas and must be installed within the current
technical standards, in order to generate overt protection, without generating risks fatal to anyone who
touches the wiring that makes up the installation.
The products have the following characteristics:
» Enables/disables shock via remote control.
» Supports up to 30 wireless devices (supports OOK modulation only).
» Range: up to 100 meters with direct view across open countryside.
» Programmable siren activation time.
» Auxiliary output protected against overload.
» High voltage, fence breach, AC/DC and sensor monitoring.
» Allows interconnection with alarm centers and sirens.
» Floating battery charger with short circuit and polarity reversal protection.
» Interval between electrical pulses of 1 second.
» Built-in high voltage module.
» 12 Vdc output for siren.
» Protection against penetration of liquids IPX4.
» LED output for arming and disarming visualization.
» 2 outputs for monitoring.
We do not guarantee the registration/operation of our switches with wireless sensors that are not
manufactured by Intelbras.
As far as remote controls from other manufacturers are concerned, they must have the following cha-
racteristics to work with our control panels:
1. Work on OOK modulation;
2. Work on frequency 433.92 Mhz;
3. Baud rate of 1,886 Kbps.
To Next Page
Loading...