Intelbras ELC 5002 - Table of Contents

To Next Page

To Previous Page

Summary

1. Technical specications 7

2. Characteristics 8

3. Products 9

3.1. Main components .............................................9

4. Installation 10

4.1. Siren ......................................................12

4.2. Auxiliary: 14.5 Vdc output ......................................12

4.3. Zone ......................................................12

4.4. Triggering the alarm panel ......................................12

4.5. Monitoring on/off fence ........................................13

4.6. LED output .................................................13

4.7. Battery start .................................................13

4.8. Activation and deactivation through PGM ...........................13

4.9. Activation and deactivation via pushbutton or key .....................14

4.10. Fixing the switch ............................................14

4.11. AC power connection (mains) ...................................15

4.12. Battery connection (bicolor parallel wire cable) ......................16

4.13. Connection of high voltage cables and grounding ....................19

4.14. Ground connection ..........................................21

4.15. Connection and assembly of the electric fence ......................22

4.16. Mounting the rods ...........................................23

4.17. Programming ...............................................23

4.18. Programming the remote control to arm/disarm the fence ..............24

4.19. Programming the remote control to arm/disarm the alarm and fence. . . . . .24

4.20. Programming the remote control to arm/disarm the alarm .............24

4.21. Wireless sensor programming for the alarm ........................24

4.22. Place the Power jumper (JP1) in the High position; ...................25

4.23. XAC 2000 TX Remote Control User Manual ........................25

4.24. XAC 4000 Smart Control remote control user manual .................25