4.25. Clear all programmed sensors ..................................26
4.26. Siren beep activation/deactivation ...............................26
4.27. Testing wired or wireless sensors and remote control .................26
4.28. Siren time change ...........................................26
4.29. Failed Pulse Amount Programming ...............................26
4.30. To enable arming/disarming the fence ............................27
4.31. To disable fence arming/disarming ...............................27
4.32. Learning the perimeter of the fence ..............................27
5. Installation completion 28
5.1. Fence tension adjustment .......................................28
6. General reset 28
7. Operation 29
7.1. Activation/deactivation of the fence/alarm ..........................29
7.2. LEDs ......................................................29
7.3. Electrier operation ...........................................29
Warranty term 30
To Next Page
Loading...