CS750 User Manual
Rev E, April 2018
Page 17 of 31
Serial Output (Optional)
The Serial Output is accessed through the mode menu under the "" option. The
following steps will enable Print On-Demand when "0" is entered.
1. Press the mode button. The display will show "".
2. Press the mode button once more. Toggle the display to "" by pressing the
lb/kg button.
3. Press the mode button once more and the print command will be transmitted.
After the print command is sent the scale will return to normal operations. If
accumulating, all accumulations will be retained.
Or press PRINT on the IR remote.
Print-In-Continuous Mode will be enabled when "1" is entered. The scale transmits one
weight line per second.
Print Output Examples
On-Demand Print Mode
GROSS: 2048 lb (No TARE or accum total)
GROSS: 2048 lb (A TARE is set)
TARE: 500 lb
NET: 1548 lb
GROSS: 2048 lb (Accumulated total and TARE set)
TARE: 500 lb
NET: 1548 lb
ACC.TOT: 3025 lb
ACCUM #01: 2048 lb (Accum total, but no TARE)
ACCUM #02: 2200 lb
ACCUM #03: 2000 lb
ACC.TOT: 6248 lb NOTE: When there is no TARE, each accumulated
weight is included in the printout (limit of ~50 weights)
Continuous Print Mode (weight line sent once per second)
2048 lb
2048 lb
2048 lb
To Next Page
Loading...
