Intercomp CS750 - Weights and Measures; Optional Equipment

CS750 User Manual
Rev E, April 2018
Page 6 of 31
Weights and Measures
The CS750 meets or exceeds Class III standards for 3000
division accuracy from 300 lb to 1000 lb. The certification was
completed by the National Type Evaluation Program (NTEP) in
accordance with the National Institute of Standards and Technology
(NIST) Handbook 44. A NTEP Certificate of Conformance Number
97-135A4 was issued under the National Conference of Weights and
Measures.
Optional Equipment
RS232 Serial Data Output / Direct Power (184256)
This option adds a metal circular connector harness to the side of the CS750. The
harness provides RS232 serial data output and direct power connections for the
following cable options:
Direct Power Cable, 100-250VAC (101055)
The Direct Power cable allows the CS750 to use 100-250VAC power instead of
batteries. The coiled power cord is 2ft long retracted and approximately 6ft in length
when extended. Four interchangeable International power plug clips accommodate US,
Europe, UK and China power types.
*Option #184256 is required
RS232/USB Serial Output Cable (101233)
The Serial Output Cable provides communication with a computer or remote display.
The 15 ft. cable provides connection from the CS750 to a 9-pin serial port. A RS232-
USB adapter is included to convert the cable to a USB Type A connection.
*Option #184256 is required
Thermal Printer Cable (101231)
The two-part Thermal Printer Cable system connects the CS750 to Citizen thermal
printers CMP-10 or CMP-20. Cable length is 15 ft.
*Option #184256 is required