Intercomp CS750 - Introduction; Specifications Overview

CS750 User Manual
Rev E, April 2018
Page 4 of 31
Introduction
This manual contains specifications, operating instructions and calibration procedures
for the Intercomp Model CS750 Crane Scale.
Specifications
Controls
General
Zero, lb/kg, Mode, Print, TARE, On, Off
Display
5 1/2 digit, 1 inch liquid crystal display (LCD) with automatic back
lighting.
Electrical
Batteries
4 X D-size alkaline
Battery Life
800 hours (1 month continuous use)
5000 hours in Stand-by mode. Using the backlight will reduce
battery life.
Filtering
Adjustable averaging up to 30 seconds.
Stand-by Mode
Scale goes into standby when shut off using the IR or RFX
remote or after an adjustable time without use or motion.
When in "stand-by" mode, scale can be turned on with the IR
or RFX remote.
Auto-Zero
Satisfies all HB-44 requirements.
Performance
Speed
4 display updates per second
Accuracy
 0.1% of reading or  1 display graduation, whichever is
greater.
Calibration Interval
Twelve months recommended
Environmental
Humidity
10 to 95% Non-Condensing
Temperature
Operating: -28 C to +65 C. / -20 F to +150 F
Storage: - 40 C to +75 C. / - 40 F to +170 F
Ingress Protection
IP50
EMI/RFI
Meets Mil Spec 461
Physical
Dimensions
Control Box
4.25" x 5" x 8.5". / 10.8 cm X 12.7 cm x 21.6 cm
Lifting Eye to Hook (Standard)
12" / 30.5 cm
Weight
7.5 lb. / 3.4 kg