56 Contents Index AdvisorOne User Manual 1.9.x 466-4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
Removing a User
Follow these steps to remove a user from the system.
1. Press the Settings icon on the main screen, then press CONFIGURATION.
2. Enter a Master PIN access code.
3. Press USERS from the Configuration & Programming screen.
4. Press USERS from the Users screen.
5. Select the user to be removed and press DELETE (Figure 44).
Figure 44: Users screen
6. Press YES (Figure 45) within five seconds of pressing DELETE. If YES is not
pressed within five seconds, the system returns to the Users screen without
removing the user.
Figure 45: User Delete screen
To Next Page
Loading...
Need help?
General
