57 Contents Index AdvisorOne User Manual 1.9.x 466-4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
7. Press CLOSE twice to exit the Users screen and return to the main Options screen.
Test
The system should be tested regularly or if any conditions change (Figure 46).
Refer to “Maintenance & Support” for more information about performing system tests.
Figure 46: Test Menu Screen
Time & Date
The Time & Date Settings screen is used to adjust the time and date and time zone,
and to alter when Daylight Savings time begins and ends (not often).
Note: In some configurations, the date and time is automatically updated, getting time
from the Internet using a Time Server. With this configuration, the date and time cannot
be changed manually.
1. Press the Settings icon on the main screen, then press CONFIGURATION.
2. Enter the Master PIN access code.
3. Press TIME & DATE.
4. Press the Left Arrow and Right Arrow icons to adjust the Date and Time settings
(Figure 47).
To Next Page
Loading...
Need help?
General
