81 Contents Index AdvisorOne User Manual 1.9.x 466-4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
Reporting
The panel may be configured to report to multiple destinations. Each destination should
be tested to be sure the communication is in working order.
1. Depending on the situation, it may be necessary to contact the central monitoring
station before starting the installation.
2. From the Configuration & Programming screen, press TEST.
3. Press REPORTING.
4. Press CALL next to the destination to test communication (Figure 73).
Figure 73: Reporting Destination Test
5. From the Test Call screen, press START to initiate a test call to the destination
(Figure 74).
Figure 74: Test Call
If the test is successful, the screen displays Report Delivered (Figure 75).
To Next Page
Loading...
Need help?
General
