98 Contents Index AdvisorOne User Manual 1.9.x 466-4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
How do I adjust system volume?
Follow the steps below to adjust the volume of beeps, key presses, and voice (Figure
90):
Note: The volume of system sirens cannot be set to 0%.
1. Press the Settings icon on the main screen.
2. Press SOUND on the General Settings screen.
Figure 90: Sound Settings
3. Use the left or right arrows to adjust volume up or down.
Can I adjust the siren volume?
No. The siren volume is intended to be loud enough to gain attention and wake all
occupants in case of an emergency.
To Next Page
Loading...
