99 Contents Index AdvisorOne User Manual 1.9.x 466-4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
How do I add a user to the system?
Follow these steps to add a user to the system. For more detailed information, see the
Users section.
1. Press the Settings icon on the main screen and press CONFIGURATION.
2. Enter a Master PIN access code.
3. Press USERS from the Configuration & Programming screen.
4. Press USERS from the Users screen.
5. Press ADD.
6. Enter settings for the new user.
7. Press SAVE to add the user and exit.
How do I edit my User settings?
Any user can change his / her own settings. Follow these steps to edit User settings.
For more detailed information, see the Users section.
1. Press the Settings icon on the main screen and press CONFIGURATION.
2. Enter a PIN access code.
3. Press USERS.
4. Press EDIT CURRENT USER.
5. Change the configuration for the current user.
6. Press SAVE when finished.
How do I edit the settings of a different user?
A Master User can edit the settings of the other users authorized to use the panel.
Follow these steps to edit a User’s settings. For more detailed information, see the
Users section.
1. Press the Settings icon on the main screen and press CONFIGURATION.
2. Enter a Master PIN access code.
3. Press USERS from the Configuration & Programming screen.
4. Press USERS from the Users screen.
5. Press a user name to select it and then press EDIT.
6. Edit the user settings.
7. Press SAVE when finished.
To Next Page
Loading...
