Interlogix Simon XT Installation Manual

20 Simon XT Installation Manual
UL Canada listed installations
This section describes the requirements for CUL (UL Canada) listed installations.
Canadian standards CSA certified accessories
Standard Class 2, 9 VAC, 3.34 A power transformer (UTC Fire & Security model
22-153-CN).
Residential burglary alarm system unit (ORD-C1023-1974)
Basic system as described for UL 1023 listed installations plus:
• Hardwired magnetic contact (13-068 or 13-071) or wireless learn mode
door/window sensor (60-670)
• Siren timeout set to six minutes or more
Residential fire warning system control unit (ULC-S545-M89)
Basic system as described for UL 985 listed installations plus:
• Wireless smoke sensor 60-848-95 learned into sensor group 26
• Siren timeout set to six minutes or more
• For 24-hour backup, the total current draw for all connected devices is limited
to 250 mA (during normal standby conditions) using a 1.2 AH battery.
California state fire marshal listed installations
Applied for.
Opening panel cover and chassis
Tabs at the top of the panel secure and release the front cover and the chassis.
The plastic hinges on the panel bottom allow the cover and chassis to swing
down and out of the way (Figure 3 on page 21).

Interlogix Simon XT Specifications

Power

power requirements	6V nominal
standby current	30mA (10mA in PowerSave Mode)
peak current	1.7 A

Operating Environment

operating temperature	32 to 120°F (0 to 49°C)
storage temperature	-30 to 140°F (-34 to 60°C)
max. relative humidity	90% non-condensing

Dimensions

height	4 1/16 in.
width	1 7/8 in.