Interlogix Simon XT Installation Manual

Simon XT Installation Manual 27
2. Connect the included phone cord to the panel LINE jack and the premises
phone jack B.
Note: If customers add phones or other phone devices to another phone jack, full
line seizure no longer exists. Inform them to contact you if they want to add a
phone or other device so that you can rewire for full line seizure by adding an
RJ31X
Figure 9: Full line seizure wiring with single landline phone
Wiring the power transformer
Connect the power transformer to the panel AC terminals as shown in Figure 10
on page 28.

Interlogix Simon XT Specifications

Power

power requirements	6V nominal
standby current	30mA (10mA in PowerSave Mode)
peak current	1.7 A

Operating Environment

operating temperature	32 to 120°F (0 to 49°C)
storage temperature	-30 to 140°F (-34 to 60°C)
max. relative humidity	90% non-condensing

Dimensions

height	4 1/16 in.
width	1 7/8 in.