Restricted rights legend
The Licensed Product is provided with RESTRICTED RIGHTS. In the event the
United States Government or an agency thereof is granted a license, the following
additional terms apply: Restricted Computer Software, as defined in the Commercial
Computer Software–Restricted Rights clause at Federal Acquisition Regulations
52.227-19, and the restrictions as provided in subparagraphs (c)(1) and (c)(2)
thereof; and as applicable, the Government’s rights to use, modify, reproduce,
release, perform, display, or disclose the Software also are restricted as provided by
paragraphs (b)(2) and (b)(3) of the Rights in Noncommercial Technical Data and
Computer Software–Small Business Innovative Research (SBIR) Program clause at
DFARS 252.227-7018.
Acknowledgment
You acknowledge that You have read and understand this agreement and agree to
be bound by its terms. You further agree that this agreement is the complete and
exclusive statement of the agreement between You and UTC FIRE & SECURITY,
and supersedes any proposal or prior agreement, oral or written, and any other
communication relating to the subject matter of this agreement.
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA
Use this product only for the purpose it was designed for; refer to the data sheet and
user documentation. For the latest product information, contact your local supplier or
visit us online at http://www.utcfireandsecurity.com/.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the affected equipment and the panel receiver to separate outlets, on
different branch circuits.
Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15 registration number: B4Z-910C-SIMON.
Part 68. This equipment complies with Part 68 of the FCC rules and the
requirements adopted by ACTA. A label on this equipment contains a product
identifier in the format US:AAAEQ##TXXXX. You must provide this number to the
telephone company upon request.
FCC Part 68 registration number: US:B4ZAL02B55910.
To Next Page
Loading...
