Installation Guide 1
Safety instructions
These instructions are intended to ensure that user can use
the product correctly to avoid danger or property loss.
The precaution measures are divided into “Warnings” and
“Cautions”.
Warnings: Warning messages advise you of
hazards that could result in injury or loss of life.
They tell you which actions to take or to avoid in
order to prevent the injury or loss of life.
Cautions: Caution messages advise you of
possible equipment damage. They tell you which
actions to take or to avoid in order to prevent
damage.
Warnings
• When using this product, you must comply with the
electrical safety regulations of the country and region.
Please refer to the technical specifications for detailed
information.
• Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 24 VAC
or 12 VDC according to the IEC60950-1 standard. Please
refer to the technical specifications for detailed
information.
• Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire
hazard.
To Next Page
Loading...
