Installation Guide 3
• To avoid heat accumulation, good ventilation is required
for operating environment.
• Keep the camera away from liquid while in use.
• During delivery, the camera shall be packed in its original
packing, or packing of the same texture.
• Regular part replacement: a few parts (e.g. electrolytic
capacitor) of the equipment shall be replaced regularly
according to their average enduring time. The average
time varies because of differences between operating
environment and using history, so regular checking is
recommended for all the users. Please contact with your
dealer for more details.
• Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent
type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
• If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume
any responsibility for problems caused by unauthorized
repair or maintenance.)
To Next Page
Loading...
Need help?
General
