Interlogix TruVision DVR 15HD - Page 116

Chapter 14: Device management
112 TruVision DVR 15HD User Manual
Figure 26: Time and Date Settings window
Table 14: Description of the Time and Date Settings window
Option Description
1.
Time Zone
Select a time zone from the list.
2.
Date Format
Select the date format from the drop-down list. Default format is DD-
MM-YYYY.
3.
Time Format
Select either the 12-hour or 24-hour time format from the list. Default
format is 24-hour format.
4.
Display Week
Check to display the day of the week in the monitor time bar.
Check the box to enable/disable. Default is Disabled.
5.
System Date
Enter the system date.
Default date is the current date.
6.
System Time
Enter the system time.
Default time is the current time.
7.
Auto DST Adjustment
Enable to activate DST is automatically. It depends on the time zone
selected.
Default is Disabled.
8.
Enable DST
Manually define DST. If this option is selected, the Auto DST
adjustment option is disabled.
Default is Disabled.
Click the check box to enable or disable daylight savings time (DST).
From
Enter the start date and time for daylight savings.
To
Enter the end date and time for daylight savings.
DST Bias
Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.