Intermec 3400

3400, 3440, and 3600 Bar Code Label Printer User’s Manual
HelvC
NugFont
Code39
x
Terms and Conventions
Listed below are special terms and conventions used throughout the manual.
Refer to the glossary for a complete list of terms found in this manual.
Terms
“Printer” refers to a 3400, 3440, or 3600 bar code label printer.
“Media” is the label stock on which the printer prints labels.
“Host” refers to a personal computer or other computer that communicates
with the printer.
A “symbol” or “bar code symbol” consists of alphanumeric characters encoded
in a bar code format.
Conventions
The following conventions are used throughout this manual for operating
procedures and descriptions of the printer.
• Feed/Pause refers to the Feed/Pause button on the printer front panel.
• Downloaded commands appear in the order that you enter them into the
printer with the following conventions:
Convention Description
< > Angle brackets < > enclose mnemonic representations of ASCII control
characters. For example, <ETX> represents the ASCII “End of Text”
control character.
data
Italic text represents variable data, which you must replace with a real
value. For example,
n
signifies a variable for which you must designate a
constant value.
[
data
] Italic text within brackets represents optional data.
Ctrl Bold text represents a key on your keypad. For example, Tab represents
the Tab key and M represents the letter M key.
Ctrl-Z When two keys are joined with a dash, press them simultaneously. For
example, if you see the command Ctrl-C, press the two keys at the same
time.
E3;F3
Type all characters that appear in the Courier font by pressing an
individual key on the keypad.