Intermec 3400

HelvC
NugFont
Code39
Optimizing Printer Performance
5-5
5
Adjusting the Print Darkness
Use the darkness adjust control in combination with the PrintSet software
configuration tool to fine-tune the darkness of print on your labels. The fine
adjustments compensate for variations in the media (“lot to lot”), the printhead,
or the printer. Set the darkness adjust control after you enter the media
sensitivity number.
To adjust the print darkness
1. Locate the darkness adjust control on the back of the printer.
2. Use a small straight-slot screwdriver to adjust the print darkness.
• To increase the print darkness, turn the control clockwise.
• To decrease the print darkness, turn the control counterclockwise.
3XXXU.037
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Turn the darkness adjust
control counterclockwise
for lighter density
Turn the darkness
adjust control clockwise
for darker density
Darkness
adjust control
Screwdriver
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
O
I