3400, 3440, and 3600 Bar Code Label Printer User’s Manual
HelvC
**
1233*
FG 8pt Italic
1-10
What the Hardware Configuration Test Label Tells You
The hardware test label provides these statistics:
•
Amount of installed memory
•
Amount of media printed
•
Printhead configuration
•
Firmware information
•
Printhead alignment (the vertical lines)
If a Hardware Configuration Test Label Does Not Print
If you are unable to print a hardware configuration test label, see “Printer
Operation Problems” in Chapter 4.
Connecting the Printer to Your System
You can connect your printer to a PC, a local area network, an AS/400 (or other
midrange computer), or a mainframe. This section tells you how to connect
your printer to any of these systems.
This illustration shows you where to connect your system to the printer. You
can use either of these two ports on the rear of the printer:
•
Serial communications port
•
I/O board port (if you have an adapter card installed)
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
3XXXU.008
O
I
Serial
communications
port
Optional I/O
board port
To Next Page
Loading...
