Intermec CK71 Series - Screws & Torque Settings

TITLE
Model
DOCUMENT NO.
PAGE
CK71 Service Work Instructions
CK71A
SWICK71-000
Page 41 of 42
OPERATION:
Screws & Torque Settings
800-570-002
SCREW 4-40X1/2 PH TORX W/NYL CRES ROHS
Main case screws x8
6.0 +/- 0.2 in-lb
T10 Torx
800-574-002
SCREW 2-56 X 7/16 PH TORX W/NYL CRES ROH
Main case screws x2
These are located on each side of the battery bay
3.5 +/- 0.2 in-lb
T7 Torx
800-565-001
SCREW,8-32X5/16,100DEG FH,SS,BLK O,ROHS
Hand strap screw
5.0 +/- 0.2 in-lb
800-573-001
SCREW 2-56X0.1875 PH TORX W/NYL CRES ROH
Attaches scan engine bracket to frame x4
2.5 +/- 0.2 in-lb
T7 Torx
655-199-001
655-199-002
screw,2-56,torx drive,wafer head,custom
Screw,2-56,torx drive,wafer head,custom
-001 attaches MLB to frame x4
-002 attaches touch panel to magnesium frame x2
2.5 +/- 0.2 in-lb
T7 Torx
800-569-001
SCREW 2-56X3/16 FH TORX W/NYL CRES ROHS
attaches keyboard PCB to frame x4
2.5 +/- 0.2 in-lb
T7 Torx
800-566-001
Custom Screw, #2-56x3.4mm Wafer Hd, RoHS
Attaches ground plate over radio slot x2
1.5 +/- 0.2 in-lb
#0 Phillips
800-451-001
800-451-002
Thd Forming Screw, M1.7 x 5mm PH, RoHS
Thd Forming Screw, M1.7x4mm Blk PH, RoHS
4mm attaches super cap bracket to back cover x2
5mm attaches EA30 to scan bracket x2
1.2 +/- 0.2 in-lb
#0 Phillips
800-450-003
Thd Forming Screw, M1.7 x 3mm FH RoHS
attaches side scan PCBs to scan bracket x2 each
1.2 +/- 0.2 in-lb
#0 Phillips
800-577-001
SCREW,M1.4x0.45x2.3mm,TAPPING,PH PD,RoHS
secures camera to scan bracket x4
.6 +/-0.1 in-lb
#0 Phillips
800-485-001
SCREW,M1.6x3.9,PH,BLK,NYLOK,ROHS
secures EV12 to scan bracket x2
1.2 +/-0.2 in-lb
#0 Phillips