Intermec CK71 Series - Handstrap

TITLE
Model
DOCUMENT NO.
PAGE
CK71 Service Work Instructions
CK71A
SWICK71-000
Page 5 of 42
OPERATION:
Handstrap
The handstrap is attached to the bottom housing. It can be removed and installed without opening the unit.
Tools Required
Description
Part Number
Straight blade screwdriver
Parts Required
Item
Part Number
Description
Qty
1
825-209-001
Handstrap Assembly, CK70/CK71
1
2
800-565-001
SCREW,8-32X5/16,100DEG FH,SS,BLK O,ROHS
1
Removal
1. Unclip the handstrap where it attaches near the bottom of the unit.
2. Remove the screw that attaches the other end of the handstrap to the back of the unit.
Installation
Installation is reverse order of removal. Tighten screw to 5.0 +/- 0.2 in-lb of torque when installing.
unclip
2
1
Remove screw