Intermec CK71 Series - Top Housing

TITLE
Model
DOCUMENT NO.
PAGE
CK71 Service Work Instructions
CK71A
SWICK71-000
Page 21 of 42
OPERATION:
Top Housing
A CK71 top housing includes the plastic housing, keypad, antenna(s), LED light pipe, and cell speaker. None of
these items can be individually replaced as they are bonded and heat staked at the factory in order to achieve the IP67
rating for the product. The top housing must be replaced as a complete unit. When selecting a CK71 top housing you
must select the correct part number based on keypad type.
There are two styles of keypads that have been used to produce top housing assemblies. Original production
used a conductive puck style (shown at left in picture below). Current production uses a plunger style (shown at right
in picture below). Units should be repaired with the style of keypad they were built with. Do not swap a conductive
puck style top housing with a plunger style housing unless you are also replacing the keyboard PCB assembly to
match it.
Tools Required
Description
Part Number
See other operations
Parts Required
Item
Part Number
Description
Qty
option
715-581S-002
HOUSING TOP ALPHA,NUMERIC ASSY LAN SPARE
1
option
715-697S-001
Housing,Top Dome Alpha Num LAN Assy
1
option
715-582S-002
HOUSING,TOP, FKEY ASSY LAN SPARE
1
option
715-696S-001
Housing,Top Dome Num FKEY LAN Assy
1
option
715-581S-003
HOUSING TOP A/N ASSY LAN, CHINA SPARE
1
option
715-697S-002
Hsg,Top Dome Alpha Num Lan China Assy
1
option
715-582S-003
HOUSING,TOP, FKEY ASSY LAN, CHINA SPARE
1
option
715-696S-002
Housing,Top Dome Num FKEY LAN China Assy
1