Intermec CK71 Series - Keypad Overlay

TITLE
Model
DOCUMENT NO.
PAGE
CK71 Service Work Instructions
CK71A
SWICK71-000
Page 6 of 42
OPERATION:
Keypad Overlay
Tools Required
Description
Part Number
Small straight blade screwdriver or Xacto knife
Isopropyl alcohol solution
Parts Required
Item
Part Number
Description
Qty
option
355-469-001
OVERLAY,GRAPHIC,NUMERIC,FKEY,CK71
1
355-471-001
OVERLAY,GRAPHIC,ALPHANUMERIC,CK71
1
Numeric FKEY Overlay Alpha Numeric Overlay
Removal
Using the tip of a small straight bladed screwdriver or other thin edge tool peel back an edge of the overlay from the
top housing. Then grasp that edge with your fingers and remove the overlay the rest of the way.
Installation
1. Select the appropriate replacement overlay.
2. Prior to installing the new overlay ensure that the contact surface area of the top housing is clean and free of any
adhesive residue left over from the overlay that was removed.
3. Remove the adhesive release liner from the new overlay and install the new overlay pressing thoroughly across the
entire area to ensure adequate adhesion.